Great-plains 1205-NT Assembly Instructions User Manual download pdf (Page 2)

1205-NT Folding Marker Option 113-549M 5/5/09

Great Plains Mfg., Inc.

Marker Disk Assembly

Refer to Figure 2:

Install the marker disk assembly (#4) to the end of the marker

arms with two 1/2" x 3" long bolts (#5), 1/2" lockwashers (#6), and

1/2" nuts (#7). A 1/2" ﬂat washer (#2) must be placed under the

head and lockwasher of the bolt that goes through the slot in the

mounting bracket.

Disk Adjustments

The aggressiveness and the mark left by the disk may be

changed by two methods:

1. Disk Angle: To change the angle of cut, loosen the two verti-

cal bolts (#1) in the marker arm and rotate the disk assembly

and retighten.

2. Disk Tip: To change the tip of the disk, loosen the two hori-

zontal bolts (#5) in the pivot adjustment and rotate the disk

assembly and retighten. The marker width adjustments are

made by loosening the marker tube u-bolt (#3) and sliding it

in or out to the desired width and retightening the u-bolt.

14061

Marker Disk Assembly

Figure 2

14069

1 2 3 4 5 6 7 8 9 10

No comments

Great-plains 1205-NT Assembly Instructions User Manual Page 2