Great-plains 2515P Operator Manual User Manual download pdf (Page 59)

4/11/2005

173-208M

Maintenance and Lubrication

Marker Maintenance

Refer to Figure 73

The marker arm is attached to marker body with a

3/8-inch, grade 2, shear bolt. If this shear bolt

breaks, replace it with a grade 2 bolt.

NOTE: Failure to replace the shear bolt with a

grade 2 bolt can cause marker damage.

If grease-seal cap for marker-disk-hub bearings is

damaged or missing, disassemble and clean hub.

Repack with grease and install a new seal or

grease cap.

Storage

Store the 3-Point Precision Bean Machine where

children do not play. If possible, store the 3-Point

Precision Bean Machine inside for longer life.

1. Unload seed box:

• Place tarp under bean machine or a bucket

under each seed meter.

• Use a large bucket to empty box as much as

possible. Make sure sliding seed tubes are in

the open position. Open seed meter clean out

to empty seed out of sliding seed tube and

meter.

2. Thoroughly clean seed and seed-treatment

residue from boxes and seed meters.

3. Remove seed meter wheels. Store ﬂat and

out of the weather.

4. Remove any dirt and debris that can hold

moisture and cause corrosion.

5. Lubricate and adjust all roller chains.

6. Lubricate areas noted under “Lubrication”,

page 58.

7. Inspect bean machine for worn or damaged

parts. Make repairs and service during the off

season.

8. Use spray paint to cover scratches, chips and

worn areas on the bean machine to protect

the metal.

9. Cover with a tarp if stored outside.

Figure 73

Marker Shear Bolt

17621

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 86 87

Comments to this Manuals

No comments

Great-plains 2515P Operator Manual User Manual Page 59

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains 2515P Operator Manual