Great-plains 4000TT Predelivery Manual User Manual Page 10
- Page / 72
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
6 1200-4000TT Great Plains Manufacturing, Inc.
586-201Q 02/11/2014
Shipping
The Turbo-Till will be shipped partially pre-assembled.
Refer to Figure 3
• Models 1200-1500 Will be shipped fully assembled,
except for hitch assembly with hydraulic system
charged.
• Models 1800-2400 will be shipped with wings folded
and hydraulic system charged, hitch assembly will
need to be installed.
• Models 3000-4000 will be shipped with center frame
parts installed, wings and attachment frames (if
equipped) will be stacked on stands and banded
together.
• Finishing attachments (if equipped), will be will be
shipped with mounted brackets assembled, reel
assemblies assembled and all bolts will be in a box.
• Remove unit from shipping stands (if equipped),
after machine is lowered to ground and carefully un-
band all componets.
• The shipping stand bolts are not used in the assem-
bly of unit.
• The shipping stands do not need to be returned to
Great Plains.
Unloading
Be sure the truck is on level ground, preferably concrete.
Centering componets:
Be sure and center fork truck or chains (overhead hoist) on componets
so they won’t slide and cause injury.
Unload Smaller Items First
Unloading the Turbo-Till is a potentially dangerous oper-
ation.
Reduce risk and complications by first unloading
1. the gangs and finishing attachments
2. the misc. boxes
3. the Turbo-Till
(described in the next section)
Unload Turbo-Till
4. Place these components well out of the manoeu-
vring area needed for unloading the Turbo-Till.
5. Double-check that all chains and tie-down straps
have been released and stowed.
6. Set parking brake on trailer tractor.
7. Slowly lift the Turbo-Till off trailer bed using two fork
lifts.
8. Stop lifting about 12” above the bed.
9. Have the truck driver slowly pull the trailer straight
out from under the Turbo-Till.
10. Making sure to keep level from front to back and side
to side, slowly lower the Turbo-Till.
11. Lower theTurbo-Till down until the shipping stands
are about 12” off ground.
12. Remove shipping stands.
13. Remove tongue jack from field positions and put in
storage position with foot of jack towards ground.
14. Slowly lower Turbo-Till until it resting on the center
transport tires and front tongue jack.
Unpacking Boxes
Note: Position boxes in area that you can maneuver
components up to machine to assembly.
15. Carefully remove banding from boxes.
16. Carefully remove banding from gangs and finishing
reels.
17. Locate and identify all componets before assem-
bling.
Figure 3
Turbo-Till Shipping
42071
1
2
- Pre-Delivery Manual 1
- Table of Contents Index 2
- Table of Contents 3
- Important Safety Information 5
- Wear Protective Equipment 6
- Avoid High Pressure Fluids 6
- Use Safety Lights and Devices 6
- Keep Riders Off Machinery 6
- Shutdown and Storage 7
- Tire Safety 7
- Safety At All Times 7
- Introduction 8
- Using This Manual 9
- Shipping 10
- Unloading 10
- Assembly and Setup Assistance 11
- Assembly 12
- 4000 Outer Wing Assembly 13
- 586-201Q 02/11/2014 14
- 3000 Hydraulic Wing Lift 15
- Assembly 11 15
- Figure 8 15
- Assembly 13 17
- Figure 9 17
- Hydraulic Hose Hookup 18
- Hose Handles 18
- Purging Hydraulic System 19
- Assembly 17 21
- Figure 14 21
- Lights & SMV 21
- Rolling Harrow (optional) 22
- Detracker Assembly (Optional) 24
- Install Rear Hitch (optional) 25
- Rear Stand 26
- Torque Values Chart 27
- Tire Inflation & Warranty 28
- Tire Inflation Chart 28
- Fittings Torque Values 29
- 02/11/2014 586-201Q 31
- 1800TT Hydraulic Lift Layout 32
- 1800TT Hydraulic Fold Layout 33
- 2400TT Hydraulic Lift Layout 34
- 2400TT Hydraulic Fold Layout 35
- 3000TT Hydraulic Lift Layout 36
- 3000TT Hydraulic Fold Layout 37
- 4000TT Hydraulic Lift Layout 38
- 4000TT Hydraulic Fold Layout 39
- 1200TT Machine Layout 40
- 1200TT Machine Layout, Rock 41
- 1500TT Machine Layout 42
- 1500TT Machine Layout, Rock 43
- 1800TT Machine Layout 44
- 1800TT Machine Layout, Rock 45
- 2400TT Machine Layout 46
- 2400TT Machine Layout. Rock 47
- 3000TT Machine Layout 48
- 4000TT Machine Layout 50
- 1200TT Rolling Harrow Layout 52
- 1500TT Rolling Harrow Layout 54
- 1800TT Rolling Harrow Layout 56
- 2400TT Rolling Harrow Layout 58
- 3000TT Rolling Harrow Layout 60
- 4000TT Rolling Harrow Layout 64
- Salina, Kansas 67402-5060 USA 72
Related products and manuals for Gardening equipment Great-plains 4000TT Predelivery Manual
(126 pages)
(46 pages)© 2020, manymanuals.com. All rights reserved. | 0.187 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals