Great-plains 401-516A Installation Instructions User Manual download pdf (Page 16)

14 YP Pressure Relief Kits Great Plains Manufacturing, Inc.

401-514M 12/28/2007

Attach Upper 150 bu Support

Refer to Figure 18

58. Select four sets of new:

802-079C HHCS 3/8-16X1 1/4 GR5

803-209C NUT FLANGE LOCK 3/8-16 PLT

59. Loosen the bolts holding the angle brackets, and

apply silicone sealant around the holes in the hop-

per. Re-position the angle brackets at the holes and

loosely re-tighten bolts .

60. Apply silicone sealant to the underside of bolt heads

, and insert them. from the inside of the hopper,

through the angle brackets and hopper. Secure with

ﬂange lock nuts .

61. When all four ﬂange lock nuts are tight, tighten

bolts .

Closeout

62. Re-install strainer(s).

63. Close lid(s).

64. Close door slide.

65. Re-mount hopper on planter (if next use will rely on

hopper rather than bulk seed box).

66. Obtain an updated Operator Manual for your planter.

Review sections on fan and hopper operations, as

recommended fan speeds are higher for updated

hoppers.

Figure 18:

Attach 150 bu Upper Support

27367

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

No comments

Great-plains 401-516A Installation Instructions User Manual Page 16