Great-plains EWNT7 1237Q-1522Q Operator Manual User Manual download pdf (Page 4)

EWNT7 and EWNT10 End Wheel No Till Drill 150-082M 4/17/2001

Great Plains Mfg., Inc.

Using this Manual

This manual has been prepared to instruct you in the

safe and efﬁcient operation of your End Wheel No-Till.

Read and follow all instructions and safety precautions

carefully.

The parts on your End Wheel No-Till have been special-

ly designed and should only be replaced with genuine

Great Plains parts. Therefore, should your End Wheel

No-Till require replacement parts go to your Great

Plains Dealer.

The right hand and left hand as used throughout this

manual is determined by facing in the direction the ma-

chine will travel when in use unless otherwise stated.

Serial Number

The serial number plate is located on the front right side

of the frame. It is suggested that the serial number and

purchase date also be recorded for your convenience in

the space provided on the checklist page at the begin-

ning of this manual.

The serial number provides important information about

your drill and may be required to obtain the correct re-

placement part. Always use the serial number and mod-

el number when sending correspondence or when

ordering parts from your Great Plains. Dealer.

The SAFETY ALERT SYMBOL indicates that there is a

potential hazard to personal safety involved and extra

safety precautions must be taken. When you see this

symbol, be alert and carefully read the message that fol-

lows it. In addition to design and conﬁguration of equip-

ment; hazard control and accident prevention are

dependent upon the awareness, concern, prudence and

proper training of personnel involved in the operation,

transport, maintenance and storage of equipment.

Watch for the following safety notations through-out your

Operators Manual:

DANGER!

Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury. This signal

word is limited to the most extreme situations.

WARNING!

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION!

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury. It may

also be used to alert against unsafe practices.

NOTE: Indicates a special point of information which

requires your attention.

For your safety and to help in developing a better under-

standing of your equipment we highly recommend that

you read the operator sections of this manual. Reading

these sections not only provides valuable training but

also familiarizes you with helpful information and its lo-

cation. The parts sections are for reference only and

don’t require cover to cover reading. After reviewing your

manual store it in a dry, easily accessible location for fu-

ture reference.

Using this Manual

Introduction

1 2 3 4 5 6 7 8 9 ... 33 34

Comments to this Manuals

No comments

Great-plains EWNT7 1237Q-1522Q Operator Manual User Manual Page 4

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains EWNT7 1237Q-1522Q Operator Manual