Great-plains P14222 User Manual download pdf (Page 10)

Series 5 Toolbar

Operating Instructions

10

1.5 Changing Equipment

• Use suitable supports to secure any raised

frame sections suspended above you!

• Caution! Risk of injury due to projecting parts!

1.6 During Operation

The person in charge must:

• provide the operator with a copy of the

Operating Instructions.

• ensure that the operator has read and

understood the instructions.

1.7 Servicing &

Maintenance

Ensure that regular checks and inspections

are always carried out within the periods

required by law or specified in these

Operating Instructions.

Prior to performing maintenance and

servicing work, ensure that the machine is

positioned on solid, level ground and is secure

and stable.

Before cleaning the unit with water, steam jets

(high-pressure cleaning apparatus) or other

cleaning agents, cover all openings into

which, for reasons of safety or operation, no

water, steam or cleaning agents are to

penetrate.

When carrying out servicing and maintenance

work, retighten any loose screw connections.

1.3 Operational Safety

All protective and safety equipment, such as

removable protective equipment, must be in

place and functioning reliably before the

machine is put in use.

Check screws and bolts regularly for

tightness and retighten if necessary.

In the event of malfunctions, stop and

secure the machine immediately.

Ensure that any faults are remedied

immediately.

1.4 No Liability for

Consequential Damage

The Series 5 Toolbar has been manufactured

by SIMBA with great care. However,

problems may still occur when it is used for

the intended purpose. This may include:

• Worn wearing parts.

• Damage caused by external factors.

• Incorrect driving speeds.

• Incorrect setting of the unit (incorrect

attachment, non-adherence to the Setting

instructions).

Therefore, it is crucial to always

check your Toolbar unit before and

during operation for correct

operation and adequate application

accuracy.

Compensation claims for damage which has

not occurred to the component is excluded.

This includes any consequential damage

resulting from incorrect operation.

Safety Data

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Comments to this Manuals

No comments