12
Simba SLD
602-262M-ENG
2013-07-25
1.5 Road Trafc Safety
When driving on public roads, tracksand
areas,itisimportanttoobservetherelevant
road traffic laws as well as the specific
regulationsrelatingtothismachine.
Payattentiontothepermittedaxle
loads, tyrecarrying capacity, and
total weight in order to maintain
adequatebrakingandsteerability
(these gures are shown on the
serialplate).
Passengers on the machine are
strictlyforbidden!
Max.roadtransportspeed16mph
(25km/h).
1.6 Accident Prevention
InadditiontotheOperatingInstructions,itis
importanttoobservetheaccidentprevention
regulations specied by agricultural trade
associations.ItistheOperator’sresponsibility
toensurethatallotherpersonsareexcluded
fromthedangerzonessurroundingoronthe
machineduringitsoperation.
ItistheOwner’sresponsibilitytoensure:
•theOperatoristrainedandcompetentto
usethemachine
&
tractor,
•thetractorissuitableforthemachine
•adequateRiskandCOSHHassessments
have been undertaken regarding the
machine’s use. Specically, these include
issues concerning contact with the soil,
dust, crop residues, chemicals, lubricants
andother compoundsduring operation or
maintenance,andthepossibilityofstones
beingejectedathighspeedduringwork.
1.6.1 Hitching-up the
machine
There is a risk of injury when hitching/
unhitching the machine. Observe the
following:
•Securethemachineagainstrolling.
• Take special care when reversing the
tractor!
•Thereisariskofbeingcrushedbetween
themachineandthetractor!
•Parkthemachineonrm,levelground.
1.6.2 On the Hydraulic
System
Do not connect the hydraulic lines to the
tractoruntilbothhydraulicsystems(machine
andtractor)aredepressurised.
Anyhydraulicsystemcontaining
an accumulator can remain
under pressure permanently
(even after following manual
depressurisationprocedureswith
atractor/implementcombination).
Itisthereforeimportanttocheck
all lines, pipes, and screw
connections regularly for leaks
and any recognisable external
damage.
The hydraulic circuit contains
specialisedttingswhichshould
notbetamperedwithunderany
circumstances. Do not attempt
tomodifyhose routingsorhose
clampingarrangements,doingso
maycauseseriousdamagetothe
machineand/orinjury.
1.SafetyData
Beware of trapping hazards
when manipulating moving
parts (changing tine depth for
example). Ensure any heavy
components are fully supported
whenremovingpins/bolts.
Comments to this Manuals