Great-plains 1005 Assembly Instructions User Manual download pdf (Page 4)

Great Plains Mfg., Inc.

4 Grease Bank Kit

151-128M 02/20/2008

Weld Bulkheads

Tack Weld Mount Plates

Refer to Figure 4

If you prefer to fully protect the mount ( , not shown)

from welding damage, disassemble the bulkhead and

space the mount plates 5

⁄

in (14.1cm) apart. Be

sure to align the holes and keep the plates vertical and in

full contact with the tool bar.

12. Tack weld the mount plates at each desired location,

and allow to cool. Tack at least four points on each

plate, at least two on each side of the plate.

Disassemble Bulkhead(s)

13. If the bulkhead was pre-assembled for tack welding,

disassemble it now, and save all parts.

If the bulkhead was disassembled for tack welding,

check the spacing with a trial re-assembly, then dis-

assemble and save all parts.

Final Weld Bulkhead(s)

14. Finish weld each plate to the tool bar, using a

⁄

(3.2mm) ﬁllet weld.

15. Allow to fully cool.

Restore Painted Surfaces

16. Use a wire brush or ﬁle as necessary to remove weld

burrs or scorched paint. Sand surfaces.

17. Apply green touch up paint and allow to dry.

Final Bulkhead Assembly

Refer to Figure 5

18. Re-assemble mount on the mount plates ,

using the saved fasteners. Torque bolts and nuts to

ﬁnal values.

Allocate Zerks

Refer to Figure 6 on page 5

19. If not already known, count the number of frame-

mounted coulters on the drill.

20. Select that (as needed) number of:

21. On drill model 1005, split the number into two equal

groups. If the total is an odd number, put the odd set

into the group for the right bulkhead.

Qty Call Part Description

(a.n.) 800-130C GREASE ZERK STRAIGHT 1/8-27NPT

(a.n.) 800-158C FTG TUBE,CONNECTOR 1/8 FNPT

Figure 4

Weld Mount Plates

27144

Figure 5

Final Bulkhead Assembly

27145

12 13

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Great-plains 1005 Assembly Instructions User Manual Page 4

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains 1005 Assembly Instructions