Great-plains 1500TM Predelivery Manual User Manual download pdf (Page 12)

586-535Q 12/12/2013

8 1200-1500TM Great Plains Manufacturing, Inc.

Assembly

Valves

Note: Bolts needed in these next steps will be bolted on parts

or located in a bag on center frame. The hoses will be

hooked to valves and cylinders and hoses running to

hitch will be rolled up on center frame. The system will

be charged. Once hitch assembly is installed hoses will

need routed on hitch, see Hose Routing below

Refer to Figure 5

17. Install the counter balance valve to block on center

frame with 5/16 x 3 1/2 hex bolts and 5/16 lock wash-

ers.

18. Align holes in double block tee in position shown,

secure with 5/16 x 4 bolts , 5/16 lock washers and 5/16

nuts.

19. Install the lock valve to the top of the bracket on center

frame with 1/4 x 2 Gr. 5 hex bolts , 1/4 lock washers

and 1/4 nuts.

20. Bolts may be tightened to specs, See “Torque Values

Chart” on page 19.

Hose Routing

Refer to Figure 6

Note: Be sure hoses running from valves to cylinders are

routed as shown before installing trusses . The hos-

es need to route in locations shown with arrows, on top

of center frame tubes to cylinders.

Figure 5

Valves

42943

Figure 6

Hose Routing

43124

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

No comments

Great-plains 1500TM Predelivery Manual User Manual Page 12