Great-plains PT1230 Predelivery Manual User Manual download pdf (Page 10)

Section 1 Assembly

10/14/08

PT1230 Folding Pull-Type Planter 401-072M

Great Plains Mfg., Inc.

8. Mount tanks. Unstrap the tanks from the shipping pal-

let. Use two people to position each tank (1) on the

weldment (2). Position each tank so the drain plug (3)

is toward the inside. Strap tanks to weldment using

tank straps (4) and 1/2-by-4-inch bolts (5).

Figure 1-16

Install Tanks

16772

9. Plumb tanks. Assemble ﬁttings as shown in Figure 1-

17.

From the roll of 1 1/2-inch hose, cut hoses to connect

ﬁttings. As a guide, use the approximate hose lengths

(in inches) on the illustration. Hose lengths will vary

from unit to unit.

79 1/2

Figure 1-17

Plumb Tanks

16777

Route hoses through holders (1) on fertilizer tank

weldment. Use worm clamps to secure hoses on ﬁt

tings.

16898

Figure 1-18

Tanks Plumbed

10. Plumb squeeze pumps.

a. From the roll of 1-inch hose cut two hoses that are

each about 13 feet 6 inches long. Check the dis

tance between the T-ﬁtting (1) and squeeze

pumps on your planter before cutting hose.

b. Route hoses over planter frame as shown in illus-

tration. Route hoses through wing housings (2)

when planter is folded.

c. Use hose clamps (3) to secure fertilizer hoses to

the planter frame in six location–four on the center

section and one on each wing. Use hose ties to

bundle the hoses together and to the planter

frame. Assemble clamps as shown in insert.

16897

Figure 1-19

T-Fitting to Squeeze Pump

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

Great-plains PT1230 Predelivery Manual User Manual Page 10

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains PT1230 Predelivery Manual