Great-plains Simba Double Press 2013 Operator Manual User Manual download pdf (Page 11)

11

Simba Double Press

610-026M-ENG

2013-01-25

1.3 Operational Safety

The machine is to be put in operation only

after instruction has been provided by an

employee of the authorised dealer or an

employee of Great Plains. The “Machine

Registration” form is to be completed and

returned to your dealer.

All protective and safety equipment, such

as removable protective equipment, must

be in place and functioning reliably before

the machine is put in use.

Check screws and bolts regularly

for tightness and retighten if

necessary.

In the event of malfunctions,

stop and secure the machine

immediately.

Ensure that any faults are remedied

immediately.

1.4 No Liability for

Consequential Damage

The Double Press has been manufactured

with great care. However, problems may

still occur when it is used for the intended

purpose. These may include:

• Worn wearing parts.

• Damage caused by external factors.

• Incorrect driving speeds.

• Incorrect setting of the unit (incorrect

attachment, non-adherence to the Setting

instructions).

Therefore, it is crucial to always

check your machine before and

during operation for correct

operation and adequate application

accuracy.

Compensation claims for damage which has

not occurred to the machine is excluded.

This includes any consequential damage

resulting from incorrect operation.

1.2 Use for the Intended

Purpose

The Great Plains Simba Double Press

is built using the latest technology and in

accordance with the relevant recognised

safety regulations. However, risks of

injury for the operator or third parties and

impairment of the machine or other tangible

assets can arise during use.

The machine is only to be operated when

in a technically perfect condition and for the

intended purpose, taking into consideration

safety and risks and following the Operating

Instructions. In particular, faults that can

impair safety are to be remedied immediately.

Original parts and accessories from Great

Plains have been specially designed for

this machine. Spare parts and accessories

not supplied by us have not been tested

or authorised. Installation or use of non-

original Great Plains products may have

a detrimental effect on specific design

features of the machine and affect the safety

of machine operators and the machine

itself. Great Plains will accept no liability

for damage resulting from the use of non-

original parts or accessories.

The Double Press is designed solely as a

cultivation implement. Use for any other

purpose, e.g., as a means of transport, will

be deemed to be improper use. Great Plains

will accept no liability for damage resulting

from improper use. The risk will be borne

solely by the operator.

Use of the Double Press behind high

power tractors (in excess of 40% above the

maximum recommended) can lead to high

loads and stresses which can cause long

term structural damage to the chassis and

key components. Such overloading can

compromise safety and is to be avoided.

1. Safety Data

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Comments to this Manuals

No comments