Great-plains 2525P Operator Manual User Manual Page 67
- Page / 106
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Great Plains Manufacturing, Inc. Maintenance and Lubrication 63
2013-05-10 118-231M
Meter Maintenance
Cleaning Out Meters
Note: Shut off sliding seed tubes, or ensure that seed
box and seed tubes are empty, before cleaning out
seed meters.
If residual seed needs to be recovered, position tarp or
buckets under the opener(s) whose meter(s) you will be
cleaning out.
Singulator Plus Meter Clean-Out
Refer to Figure 80 and Figure 81
1. Remove retaining clip and pull out the pin.
2. Pull out on tab . This allows seed to fall out the
seed delivery tube. A second tab appears near
the meter base indicating that the clean-out is open.
3. Rotate meter wheel:
• On 20 Series, remove the wheel retainer , pull
the meter wheel out slightly, and rotate it clock-
wise to clear seed from the top of the meter.
• On 25 Series, disengage the drive coupler (see
Figure 37 on page 33), and rotate the wheel
counter-clockwise to clear seed from the top of
the meter.
4. For thorough cleaning and inspection, completely
remove the seed wheel.
5. Shake clean-out door tab a few times to clear any
seed in its pocket.
6. Re-seat wheel if moved, and re-install wheel
retainer . Close cleanout door , . Re-insert pin
and secure with clip . Re-engage drive coupler (on
25 Series).
Finger Pickup Meter Clean-Out
Refer to Figure 82
1. Pull cleanout door away from the opening and
allow seed to fall.
2. Disengage the drive coupler (see Figure 37 on
page 33), and rotate the wheel counter-clockwise to
clear seed from the pickup fingers.
3. Close cleanout door . Re-engage drive coupler.
Figure 80
Singulator Clean-Out Pin
22856
1
2
4
1
2
3
4
Figure 81
Singulator Clean-Out Open
22857
3
2
4 2 3
1
Figure 82
Finger Clean-Out Open
22859
1
1
1
- Operator Manual 1
- Table of Contents 3
- Important Safety Information 5
- Shutdown and Storage 6
- Use Safety Lights and Devices 6
- Transport Machinery Safely 6
- Avoid High Pressure Fluids 7
- Practice Safe Maintenance 7
- Tire Safety 7
- Prepare for Emergencies 8
- Wear Protective Equipment 8
- Handle Chemicals Properly 8
- Safety At All Times 9
- Safety Decals 10
- 818-055C 10
- 838-266C 10
- 838-265C 11
- 838-267C 11
- 818-590C 12
- 838-102C 12
- 818-337C 12
- 818-339C 13
- 818-682C 13
- 818-398C 13
- 818-587C 14
- 818-855C 14
- 818-752C 14
- Introduction 15
- Owner Assistance 16
- Preparation and Setup 17
- Color Hydraulic Function 18
- Leveling the Drill 19
- Frame Height 20
- Operating Instructions 21
- Field Operation 22
- Seed Lubricants 23
- Transporting 24
- Marker Operation 25
- Model 20P Only: 26
- All Models: 26
- Adjustments 27
- Ground Drive Adjustments 28
- Marker Adjustments 29
- Marker Disk Adjustment 30
- Marker Chain Adjustment 30
- Marker Speed 31
- Row Unit Adjustments 32
- Row Unit Down Pressure 33
- Cam Notch Pounds 34
- Row Unit Shutoff 36
- 25 Series Row Unit Lock-Up 37
- 25 Series Coulter Adjustments 38
- Side Gauge Wheel Adjustment 41
- Seed Firmer Adjustments 49
- Press Wheel Adjustment 51
- Troubleshooting 53
- Planting too much 54
- Acremeter does not 54
- Problem Cause Solution 54
- Uneven seed depth 56
- Excessive seed 56
- Maintenance and Lubrication 59
- Marker Maintenance 60
- Drive System Maintenance 62
- Opener Side Wheel Maintenance 63
- Opener Disc Maintenance 64
- Seed Tube Maintenance 65
- Grommet Maintenance 65
- Meter Maintenance 67
- Installation Steps 70
- Annual Maintenance 70
- Lubrication 71
- Seasonally 72
- Seed Monitor 73
- Hitch Setback Kit 74
- Gauge Wheels 74
- Baffle Kits 75
- Seed Tube Plug 75
- Weight Bracket Kit 75
- Unit-Mounted Disk Coulters 76
- 20 Series Seed Meter Wheels 77
- 25 Series Seed Meters 78
- 25 Seed Meter Wheels 78
- Scrapers 79
- Seed-Lok® Seed Firmer 79
- Keeton Seed Firmer 80
- Row Unit Press Wheels 80
- Appendix 81
- Torque Values Chart 82
- Marker Extension 83
- Model 2025P Marker Extension 87
- 109.25 in 87
- 277.50 cm 87
- Model 2520P Marker Extension 90
- Model 2525P Marker Extension 94
- Chain Routing 97
- 20 Series Meter Drive Chain 98
- 25 Series Meter Drive Chain 99
- Hydraulic Diagrams 100
- Warranty 101
- 118-231M 2013-05-10 102
- 2013-05-10 118-231M 103
- Salina, Kansas 67402-5060 USA 106
Related products and manuals for Gardening equipment Great-plains 2525P Operator Manual
(10 pages)
(45 pages)© 2020, manymanuals.com. All rights reserved. | 0.102 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals