Great-plains 2S-2600HDF Predelivery Manual User Manual download pdf (Page 11)

Great Plains Manufacturing, Inc. Assembly 9

08/01/2007 195-069Q

Locate Ladder Mount Holes

Refer to Figure 4 or Figure 5

Where to place the top ladder mount depends on whether

the drill has the Small Seeds option. Install with reference

to the appropriate Figure for the drill.

Refer to Figure 5

Top mount weldments are provided in left-side and

right-side versions and are not interchangeable. All other

parts may be used on either end. Start with the left wing:

1. Select one:

195-063H LADDER MOUNT TOP WELDMENT LH,

and four:

802-030C RHSNB 7/16-14X1 3/4 GR5.

2. Position top mount over the four walkboard holes

appropriate for the conﬁguration (see above).

3. Insert the four bolts to loosely hold the top mount

in place on the walkboard .

4. Select one:

195-340D LADDER MOUNT BOTTOM PLATE

and four sets of:

804-014C WASHER LOCK 7/16 PLT

803-015C NUT HEX 7/16-14 PLT

5. Position the bottom plate under the walkboard

and inside the top mount . Loosely hold it in place

with the washers and nuts .

6. Select two sets of:

802-017C HHCS 3/8-16X1 GR5

804-013C WASHER LOCK SPRING 3/8 PLT

803-068C NUT HEX FLANGE 3/8-16 PLT

7. Insert the screws through the side holes in both

the top mount and bottom plate , and secure

with lock washers and ﬂange nuts .

8. Tighten the four

⁄

in nuts on bolts , securing

the top mount to the bottom plate .

9. Selecting one:

195-064H LADDER MOUNT TOP WELDMENT RH

in place of mount , repeat step 1 through step 8 for

right wing section.

Figure 4

Small Seeds Mounting

27055

Figure 5

Mount w/o Small Seeds

27036

15 4

23 19

13 15

22 20

19 17

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Comments to this Manuals

No comments

Great-plains 2S-2600HDF Predelivery Manual User Manual Page 11

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains 2S-2600HDF Predelivery Manual