Great-plains 2S-2600HDF Predelivery Manual User Manual download pdf (Page 12)

10 2S-2600HD Great Plains Manufacturing, Inc.

195-069Q 08/01/2007

Install Ladders

The ladders mount between the lugs of the upper

mounts. Flat washers are placed outside the ladder side

frames and inside the lugs (between ladder side frame

and mount). Hex heads are to the inside, to minimize

obstructions to foot movement during climbing.

Refer to Figure 6

(which shows only the left side assembly,

on a drill without Small Seeds)

Start with the left walkboard.

10. Select one:

195-062H LADDER WELDMENT 3-STEP NARROW

11. Lay the ladder on the walkboard with the swing

holes up and near the top mount lug holes. Align

the holes in the ladder in between the holes in the

lugs.

12. Select two sets of:

802-079C HHCS 3/8-16X1 1/4 GR5

804-016C WASHER FLAT 1/2 SAE PLT

803-209C NUT FLANGE LOCK 3/8-16 PLT

13. Insert a screw through (in this order):

• the ladder side plate,

• a washer , and

• the mount lug.

Secure with lock nut .

14. Repeat step 10 through step 13 for right wing walk-

board.

15. Swing both ladders down to check operation and

position for decal placement.

16. Skip to “Apply Reﬂectors and Decals” on page 11.

Figure 6

Ladder Installation

27037

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

No comments

Great-plains 2S-2600HDF Predelivery Manual User Manual Page 12