Great-plains 3000TM Operator Manual User Manual download pdf (Page 20)

16 1800-3000TM Table of Contents Index Great Plains Manufacturing, Inc.

586-536M Table of Contents Index 10/29/2013

Clevis Hitch

Refer to Figure 7

The base hitch must be upright (with the recessed notch

on the bottom) for this conﬁguration. This places the

tongue weight on the base hitch, and not the clevis.

1. Select one each:

890-798C HITCH CLEVIS

802-487C HHCS 3/4-10X6 GR8

803-367C NUT HEX TOP LOCK 3/4-10 PLT

2. With the square-shouldered end of the clevis up,

fully seat the clevis in the upright base hitch . Insert

the Grade 8 bolt from below. Secure with lock

nut .

Hitch Failure Hazard:

Install the hitch base and assemble the clevis parts as shown.

Incorrect installation or assembly may result in failure of the

clevis bolt, leading to hitch failure. This could result in a serious

highway accident or severe machine damage.

Category III Hitch

The base hitch must be inverted (with the recessed notch

on the top) for this conﬁguration. Set the V-block to

allow some vertical articulation of the draw bar pin. Always

use at least one cushion .

1. Select one each:

PPI-302V TOP PLATE - CAT 3

PPI-203VR V-BLOCK

802-383C HHCS 3/4-10X3 GR5

and two:

PPI-205H CUSHION

2. Set the cushions inside the hitch recess, just for-

ward of the vertical bolt hole. Position the V-block

forward of the cushions and check the size of the

resulting pinning hole. Remove a cushion if needed.

3. Add the top plate . Secure from below with Grade 5

bolt .

Transport Locks

Refer to Figure 8

4. Once the cylinders are connected, raise the unit com-

pletly. If the transport locks are in place on cylinders

, remove them at this time.

5. Store the transport locks in hole of the lift mechanism

link .

Note: Always use transport locks and wing fold pins when

transporting.

Figure 7

Conﬁgure Hitch

31740

42245

31741

Figure 8

Transport Locks

42066

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Comments to this Manuals

No comments

Great-plains 3000TM Operator Manual User Manual Page 20

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains 3000TM Operator Manual