Great-plains 3S-3000 Assembly Instructions User Manual download pdf (Page 13)

2/17/2005

195-307M

Great Plains Mfg., Inc.

Installation Instructions

Refer to Figure 17

10. Assembleclutch linkage. First, U-bolt the cam

bracket (14) under the center bearing bracket

using 3/8" U-bolts and lock nuts. Position cam

bracket so the inside edge of the right ear is

3 5/32" from the edge of the center bearing

bracket.

Refer to Figure 18

11. Pin the shut-off cam (15) between the cam-

bracket ears using clevis pin and cotter pin.

12. Attach the clutch link (16) to shut-off cam and

clutch using 3/8" nylock jam nuts.

13. Use a 5/16" x 1 1/2" bolt and two nuts to se-

cure link spring (17) to the clutch link. Hook

other end of spring to center bearing bracket

as shown.

14. U-bolt the shut-off bracket (18) to the opener

frame directly below the cam bracket. Use

1/2" U-bolts, lock washers and nuts. Position

the bracket between openers so the bracket

will engage the cam when openers are lifted.

17098

17100

Figure 17

Figure 18

1 2 ... 8 9 10 11 12 13 14 15

No comments

Great-plains 3S-3000 Assembly Instructions User Manual Page 13