Great-plains 3S-3000 Assembly Instructions User Manual download pdf (Page 4)

195-307M 2/17/2005

Great Plains Mfg., Inc.

Point-Row Option 2005+

4

Refer to Figure 5

5. Assemble new 20" hoses (12) to ﬁlters (18).

Assemble3/4" elbows (20) into top-front ports

of the pressure control valve. Using elbows

(19), connect ﬁlters to the control valves. Us-

ing tee ﬁttings (13), assemble new 18" hoses

(14) and 86" hoses (15) to bottom ports. Us-

ing adaptor ﬁttings (16), assemble remaining

86" hoses (17) to rear ports.

6. Route 86" hoses (15 and 17) from new pres-

sure control valves back to drill frame.

7. Connect hoses to new block. Connect 21"

hoses to lower-front ports in block. Connect

18" hoses to top-front ports in block. Connect

hoses to block in same order as valves. (For

example, connect hoses from center valve to

center ports in block.)

8. Install the new pressure gauge using thread

sealant on gauge threads only.

22960

Figure 5

Hoses

1 2 3 4 5 6 7 8 9 ... 14 15

Comments to this Manuals

No comments