Great-plains 4000TM Assembly Manual User Manual Page 47
- Page / 80
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Great Plains Manufacturing, Inc. Assembly 43
12/03/2013 586-537Q-ENG
Install Rear Hitch (optional)
Note: Carefully un-band the components. There are two dif-
ferent types of rear hitches, rear hitch extended or a-
frame style. See appropriate mounting directions listed
below.
Extended Rear Hitch
Refer to Figure 35
143.Attach middle of rear hitch arms to rear tube of drag
frame with 5/8 x 3 1/32 x 4 1/2 u-bolts , 5/8 lock wash-
ers and 5/8 nuts. Attach front plates of rear hitch arms
to rear tube of center frame with 3/4 x 5 1/32 x 4 1/2 u-
bolts , 3/4 lock washers and 3/4 nuts.
144.Attach 46” cross arm to bottom side of rear hitch truss
plates with 5/8 x 3 1/32 x 4 1/2 u-bolts , secure with 5/8
lock washers and 5/8 nuts.
Note: Do not tighten any bolts until every thing is installed.
145.The bolt on sleeve assembly with rigid or flex slide
may be fastened using 5/8 x 3 1/32 x 4 1/2 u-bolt ,
secure with 5/8 lock washers and 5/8 nuts.
146.If machine is equipped with rolling harrow only, attach
rigid or flex slide to rear tube of drag frame, with 5/8 x
3 1/32 x 4 1/2 u-bolts , secure with 5/8 lock washers
and 5/8 nut.
147. Tighten all bolts to specs, See “Torque Values Chart”
on page 46.
A-Frame Hitch
Refer to Figure 36
148.Attach rear mounting bar to rear of center frame with
3/4 x 2 bolts , 3/4 lock washers and 3/4 nuts.
149.Attach a-frame hitch to rear of center frame with 5/8 x
4 1/32 x 4 1/4 u-bolts , 5/8 lock washers and 5/8 nuts.
150.Hitch will have either the flex slide assembly or the
rigid slide assembly . There will be a 3/4 x 1 1/2 hex
bolt and 3/4 jam nut in front hole of assembly to keep
the slide assembly from sliding clear out.
151.If machine is equipped with optional rear hitch accessory
kit, it may be installed as shown in “Parts Manual”.
152. Tighten all bolts to specs, See “Torque Values Chart”
on page 46.
153.Route hoses and light harness along hitch and frame
with hose clamps and hose wraps, provided.
Note: Be sure hoses and light harness are fastened securely
so they don’t drag or get pinched.
2
3
1
Figure 35
Extended Rear Hitch
42076
4
7
5
2
6
1
2
1
3
4
2
5 6
2
7
2
5
4
3
Figure 36
A-Frame Hitch
42441
2
7
6
1
1
2
3
4
5
6
7
- Assembly Manual 1
- Table of Contents Index 2
- Table of Contents 3
- Important Safety Information 5
- Wear Protective Equipment 6
- Avoid High Pressure Fluids 6
- Use Safety Lights and Devices 6
- Keep Riders Off Machinery 6
- Shutdown and Storage 7
- Tire Safety 7
- Safety At All Times 7
- Introduction 8
- Using This Manual 9
- Shipping Inventory 10
- Unloading 11
- Assembly 12
- Center Transport 13
- Valve Brackets & Valves 15
- Valve Brackets & Hoses 15
- Front Trusses & Level Bar 16
- Inside Wing Transport 19
- Outside Wing Transport 21
- Depth Stop & Angle Gauge 22
- Assembly 19 23
- 586-537Q-ENG 12/03/2013 24
- Assembly 21 25
- Figure 17 25
- Assembly 23 27
- Figure 18 27
- 4000 Hydraulic Fold 28
- Assembly 25 29
- Figure 19 29
- Hydraulic Hose Hookup 30
- Hose Handles 30
- Assembly 27 31
- Purging Hydraulic System 32
- Assembly 29 33
- Figure 22 33
- Center Gang Bar 34
- Assembly 31 35
- Figure 23 35
- Inside Wing Gang Bar 36
- Assembly 33 37
- Figure 24 37
- Outside Wing Gang Bar 38
- Assembly 35 39
- Figure 25 39
- Front Light Assembly 40
- Rear Lights and SMV Assembly 41
- 3500 Wing Fold Assist 42
- Proximity Sensor Adjustment 43
- Gang Cylinder Purging 43
- Hose Routing Hitch 44
- Gauge Wheel (optional) 44
- Rolling Harrow (optional) 45
- Install Rear Hitch (optional) 47
- Extended Rear Hitch 47
- A-Frame Hitch 47
- Rear Stand 48
- Completing Setup 49
- Torque Values Chart 50
- Tire Inflation Chart 51
- 3500TM Hydraulic Lift Layout 52
- 4000TM Hydraulic Lift Layout 54
- 3500TM Hydraulic Fold Layout 56
- 12/03/2013 586-537Q-ENG 57
- 4000TM Hydraulic Fold Layout 58
- 3500TM Machine Layout 64
- 4000TM Machine Layout 66
- 3500TM Rolling Harrow Layout 68
- 4000TM Rolling Harrow Layout 72
- Salina, Kansas 67402-5060 USA 80
Related products and manuals for Gardening equipment Great-plains 4000TM Assembly Manual
(16 pages)
(70 pages)© 2020, manymanuals.com. All rights reserved. | 0.264 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals