Great-plains 40P Assembly Instructions User Manual download pdf (Page 3)

1/9/03

118-811M

Great Plains Mfg., Inc.

3

Installation Instructions

Refer to Figure 7

1. Using predrilled holes, remove bolt (1) from

feedercup tray and replace with eye hook (2),

ﬂat washers (3), lock washer (4) and hex nut

(5) supplied in kit. Assemble the eyebolts in

the same manner for all boxes. There are two

eyebolts per feedercup tray, one at each end

of tray. Note: If there are no holes, drill 1/4”

hole (6) on edge of outlets.

Refer to Figure 8

2. Line meter covers with foam seal all the way

around the edges. The two outside meter cov-

ers require an additional 4" strip to be added

to both ends of the cover.

3. Place meter covers over tube outlets not be-

ing used. Place Seedtube corks in tubes at

each end of the box. See page 6 for place-

ment. Make sure there is a good seal to rear

box panel.

Refer to Figure 9

4. Use tarp strap to hold meter covers in place

by fastening one end to the eye hook pulling it

over the meter cover and hooking it to the box

divider

Assembly Instructions for 118-826A Baffle Package

Figure 7

Feedercup Tray

Figure 8

Foam Seal

Figure 9

Eye Hook to Box Divider

19252

19251

19254

19253

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments