Great-plains 40P Assembly Instructions User Manual download pdf (Page 4)

118-811M 1/9/03

Great Plains Mfg., Inc.

Bafﬂe Package Option

Refer to Figure 4

1. Loosen fasteners on left inside of left box (1)

as shown in ﬁgure 3. Place outer end box clip

(2) over bolts and retighten fasteners. Loosen

fasteners on right inside of left box and place

inner box end clip over bolts and retighten. Be

sure clips are pushed down on bolts. Assem-

ble the clips in the same manner for all boxes.

Refer to Figure 5

2. Line meter covers with foam seal all the way

around the edges.

3. Place meter cover over tube outlets not being

used. Place Seedtube corks in tubes at each

end of the box. See page 6 for placement.

Make sure there is a good seal to rear box

panel.

Refer to Figure 6

4. Use tarp strap to hold meter covers in place

by fastening one end to the box end clip pull-

ing it over the meter cover and hooking it to

the center divider.

Assembly Instructions for 118-827A Baffle Package

Fasteners

(1)

End Box

Clip (2)

Figure 6

Box Divider

Figure 5

Foam Seal and 4" Strips

Figure 4

Box Ends

19249

19275

19253

1 2 3 4 5 6 7 8 9

No comments

Great-plains 40P Assembly Instructions User Manual Page 4