Great-plains NTA1300 Predelivery Manual User Manual download pdf (Page 10)

NTA 1000 and NTA 1300 148-528Q 7/29/2004

Great Plains Mfg., Inc.

“H” Frame, Sub-Frame and Box

Refer to Figure 11

1. Center and assemble sub-frame (1) to the “H” frame

(2) using 3/4 x 6 1/32 x 5 u-bolts, lock washers and hex

nuts.

2. Place box (3) on frame (1) using clamp plates (4) and

fasteners. (20mm x 15cm, HHCS bolt, ﬂat washer,

lock washer and nuts). Fasten box to frame using

12mm x 30mm hex bolts, ﬂat washers, lock washers

and nuts (5).

3. Up to three spacers can be used in each place to

space between the support angle and the “H” frame

support tube (6). They are held in place using a 1/4 ﬂat

washer and a 1 1/4 x 1 self-tapping screw.

Refer to Figure 12

NOTE: Center the frames when assembling together. See

ﬁgure 12 for measurements between frames.

19413

19440

Figure 11

“H” Frame to Sub-frame to Box

Figure 12

Centering Frames

Assembly

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

No comments

Great-plains NTA1300 Predelivery Manual User Manual Page 10