Great-plains SS1700 Operator Manual User Manual download pdf (Page 19)

Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 15

06/14/2012 Table of Contents Index 596-086M

Straight Shins & Tips Assembly

Refer to Figure 8

22. Attach straight shin retainer to the straight shank

with 1/2 x 2 1/2 bolts , 1/2 hardened washer and 1/

2 ﬂange lock nut.

23. Slide one end of the straight wear shin under the

straight shin retainer . Hold the lower end in place by

installing a tip (1 1/4 x 2 with ﬁn, shown) . Fasten with

1/2 x 2 1/2 bolts , 1/2 hardened washer and 1/2

ﬂange lock nut.

Note: Install the 1/2 x 2 1/2 bolts as shown. The ﬂow of

dirt on the underside of tip will tend to tighten nut.

No-Till Shins & Tips Assembly

Refer to Figure 9

24. Attach the retainer clip to the no-till shank with 1/2

x 1 3/4 bolts and 1/2 ﬂange lock nut.

25. Remove the 1/2 x 1 3/4 roll pin and save for later

use.

26. Slide one end of the no-till wear shin under the

retainer clip . Hold the lower end in place by installing

a no-till tip . Secure with 1/2 x 1 3/4 roll pin in rear

hole of tip (removed in previous step).

27. Insert the 3/4 x 1.7 heavy roll pin in front hole of tip

to help secure tip.

Coulter Assembly

Refer to Figure 10

28. Position the coulter stop in the slot of the casting

assembly .

29. Slide the casting assembly and coulter stop onto shank

, sliding it up past the hole in the end.

30. Install roll pin in the hole and allow casting to slide

back down until it is resting on the roll pin.

31. Place jam nut on 5/8x1 1/2” set screw and insert

set screw in the casting assembly. Insert 5/8x1 set

screw in the coulter stop and refer to See “Coulter

Alignment” on page 17 for proper setting.

Figure 8

Straight Shins & Tips

42786

1 2

3 4

Figure 9

No-Till Shins & Tips

42787

1 2

6 4

Figure 10

Coulters

42790

6 5

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Comments to this Manuals

No comments

Great-plains SS1700 Operator Manual User Manual Page 19

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains SS1700 Operator Manual