Great-plains SS1700 Operator Manual User Manual download pdf (Page 20)

16 SS1300 & SS1700 Table of Contents Index Great Plains Manufacturing, Inc.

596-086M Table of Contents Index 06/14/2012

Machine Adjustments

Pre-Leveling of Machine

Front to Rear Leveling

32. Pre-leveling of machine may be done on a level ﬂoor.

Lower the machine down until the shank tips are just

above the ﬂoor.

33. Adjust the 3 point top link until the front and rear points

are level.

Auto Reset Shank Adjustment

Refer to Figure 11

34. The dual spring package should be preloaded so both

top and bottom springs are loaded evenly and measure

23.8” from end of coil to end of coil.

Spring pack is pre-loaded at factory and should not be disassem-

bled in the ﬁeld. You could be severely injured or killed by instant

release of stored energy.

Figure 11

Auto Reset Shanks

24464

Down Stop

(not visible)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Operator Manual 1
Table of Contents Index 2
Table of Contents 3
Important Safety Information 5
Wear Protective Equipment 6
Handle Chemicals Properly 6
Avoid High Pressure Fluids 6
Use Safety Lights and Devices 6
Keep Riders Off Machinery 7
Transport Machinery Safely 7
Shutdown and Storage 7
Tire Safety 7
Practice Safe Maintenance 8
Safety At All Times 8
Safety Decals 9
838-595C 12
Caution: Tire 90 PSI 12
Introduction 13
Description of Unit 14
Using This Manual 14
Owner Assistance 14
Preparation and Setup 15
Hitching with 3-Point 16
Shank Mounting 18
Coulter Assembly 19
Machine Adjustments 20
Coulter Adjustment 21
Coulter Spring 22
Operating Instructions 23
Transporting 24
Troubleshooting 25
Maintenance and Lubrication 26
Seasonally 27
Berm Conditioner (Optional) 28
Appendix 29
Tire Inﬂation Chart 30
Torque Values Chart 31
SS1300-03-30” Machine Layout 32
SS1300-03-36” Machine Layout 33
SS1300-03-38” Machine Layout 34
SS1300-03-40” Machine Layout 35
SS1300-04-24” Machine Layout 36
SS1300-04-30” Machine Layout 37
SS1300-04-36” Machine Layout 38
SS1300-04-38” Machine Layout 39
SS1300-04-40” Machine Layout 40
SS1300-05-30” Machine Layout 41
SS1300-06-24” Machine Layout 42
SS1300-08-24”Machine Layout 43
SS1700-05-36” Machine Layout 44
SS1700-05-38” Machine Layout 45
SS1700-05-40” Machine Layout 46
SS1700-06-30” Machine Layout 47
SS1700-06-36” Machine Layout 48
SS1700-06-38” Machine Layout 49
SS1700-06-40” Machine Layout 50
SS1700-07-30” Machine Layout 51
SS1700-07-36” Machine Layout 52
SS1700-07-38” Machine Layout 53
SS1700-07-40” Machine Layout 54
SS1700-08-30” Machine Layout 55
Warranty 56
Salina, Kansas 67402-5060 USA 60

Comments to this Manuals

No comments

Great-plains SS1700 Operator Manual User Manual Page 20

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains SS1700 Operator Manual