Great-plains TL350 Operator Manual User Manual download pdf (Page 24)

24

Simba TL

605-039M-ENG

 2013-02-27

5. Servicing and

Maintenance

Follow the safety instructions for

servicing and maintenance.

5.1 Servicing

Your machine has been designed and

constructed for maximum performance,

operational efficiency and operator

friendliness under a wide variety of operating

conditions.

Prior to delivery, your machine has been

checked at the factory and by your authorised

dealer to ensure that you receive a machine

in optimum condition.

To ensure trouble-free operation,

it is important that servicing and

maintenance work is performed at

the recommended intervals.

5.2 Cleaning

In order to ensure that the machine is

always in operating condition and to achieve

optimum performance, perform the cleaning

and servicing work at regular intervals.

Avoid cleaning the roll / disc bearings with

a high- pressure hose or a direct water jet.

The housing, screwed connections and ball

bearings are not watertight.

5.4 Disc Hub

Maintenance

Disc hubs are sealed for life and

do not require greasing.

Check disc hubs regularly for

tightness. Tighten if necessary.

5. Servicing and Maintenance

Ensure the machine is safely

supported before attempting

maintenance work on tines.

Do not attempt to assist tting tine

points with a steel headed hammer,

this can lead to splintering of the

metal due to its hardness, which

can cause injury. If tine fitting

requires assistance, a copper/

hide or plastic mallet should be

used.

Ensure the tine leg is supported

when removing pins to ensure it

doesn‘t fall.

5.3 Tines

When performing maintenance

work on tines extreme care

should be taken. Wear goggles

and gloves at at all times when

maintaining tines.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments