Great-plains TSF1290 Operator Manual User Manual Page 25
- Page / 96
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Great Plains Manufacturing, Inc. Preparation and Setup 21
05/10/2012 500-641M
Hitching with PTO Pump
Refer to Figure 6
A PTO pump sprayer has a ball hitch. The hitch parts
include a hitch plate and ball hitch pin to adapt a plain
tractor drawbar to ball hitch use.
If the tractor already has a ball hitch-compatible drawbar,
skip to step 6.
1. Remove the hammer-strap on the tractor.
2. Assemble the ball hitch plate to the drawbar by
placing the 1-8 x 5in long bolt through the drawbar
hole using flat washers on both ends.
3. Place the backup plate on top of the drawbar and
orient the slots so they point in the opposite direc-
tions from the hitch plate slots.
4. Insert the
3
⁄
4
-10 x 5in long bolt through washers,
the backup plate slots and the hitch plate slots.
Secure with washers and flange nuts provided.
5. Insert the ball hitch pin stud in the hitch plate
and secure with washer and 1
1
⁄
4
-7 nylon insert nut.
6. Park the sprayer in an open, flat, level area with the
jack in the park position.
Refer to Figure 7 and Figure 8
7. Back the tractor up to the sprayer. Hook up the
sprayer ball hitch onto the stud pin mounted on
the ball hitch plate . Secure the ball hitch with the
large flat washer and the lynch pin .
8. Remove the jack and pin it to the storage stob on the
brace tube above the left wheel axle.
Axle Spacing
The TSF sprayers have sliding axles allowing wheel cen-
ter-lines to be in the range:
N.America: 80 to 120 inches (203 to 305cm)
Export: 203 to 290cm (80 to 114in).
You can set them to match or complement tractor tire
spacing.
This adjustment is most easily done when the sprayer is
mechanically hitched with empty tanks. See “Axle
Wheel Spacing Adjustment” on page 58 for detailed
instructions.
Figure 6
Ball Hitch
20359
1
2
3
5
4
7
8
6
1
2
3
5
2
4
5 2
Figure 7
Jack in Parking Position
13811
6 2
6
2
8 7
Figure 8
Jack in Storage Position
20402
- Operator Manual 1
- Table of Contents 3
- Important Safety Information 5
- Wear Protective Equipment 6
- Handle Chemicals Properly 7
- Confined Space 8
- Use A Safety Chain 8
- Keep Riders Off Machinery 8
- Use Safety Lights and Devices 8
- Check for Overhead Lines 9
- Transport Machinery Safely 9
- Shutdown and Storage 9
- Practice Safe Maintenance 10
- Prepare for Emergencies 10
- Tire Safety 10
- Safety At All Times 11
- Safety Reflectors and Decals 12
- 818-265C 13
- Daytime Reflectors 13
- 818-267C 13
- Amber Reflectors 13
- 500-641M 05/10/2012 14
- 05/10/2012 500-641M 15
- EXCESSIVE SPEED HAZARD 17
- 818-381C 20
- 818-304C 20
- Introduction 21
- Owner Assistance 22
- Preparation and Setup 23
- Hitching with Hydraulic Pump 24
- Axle Spacing 25
- Electrical Connections 26
- Connection Comment 26
- Hydraulic Hookup 27
- Tractor / PTO Shaft Hookup 28
- Leveling Sprayer 29
- Locking System Setup 31
- Hydraulic Pump Setup 31
- Electrical Installation 32
- Raven SCS 450 33
- Hydraulic Valve Control 34
- Foam Marker Control (Option) 34
- Spraying Setup 35
- Manual Throttle Valve 36
- Sprayer Calibration 37
- Operations 40
- Using Hand Wash Tank 41
- Figure 28 44
- Sprayer Tank Plumbing 44
- Operations 41 45
- Figure 29 45
- Boom Plumbing System 45
- Filling Tanks 46
- Filling the Flush Tank 47
- Filling the Main Tank 47
- Adding Chemicals 50
- Inducting Chemicals (Option) 51
- Agitation 52
- Boom Operations 53
- Operating Pump 56
- Unloading Materials 56
- Tank and Boom Flush 57
- Adjustments 61
- Axle Wheel Spacing Adjustment 62
- Break Away Spring 63
- Troubleshooting 64
- Maintenance and Lubrication 66
- Filter Maintenance 67
- Shear Bolt 68
- Pump Maintenance & Repair 69
- Elevator Slide 73
- Quad-Jet Agitators 73
- Tank Entry 74
- Lubrication 75
- Seasonally 77
- Autoboom 78
- Axles and Wheels 78
- Calibration Accessories 79
- Chemical Inductor 79
- High Volume Foam Marker 79
- Gauge Protector 80
- Hitches (Hydraulic Pump Only) 80
- Open Center Hydraulic Kit 80
- Speed Sensors 82
- Appendix 83
- Torque Values 84
- Valve Port Function 85
- 60-Foot Sections 87
- Raven G1 Autoboom Hydraulics 88
- Warranty 89
- Tire Pressure and Torque 92
- Salina, Kansas 67402-5060 USA 96
Related products and manuals for Gardening equipment Great-plains TSF1290 Operator Manual
(5 pages)
(70 pages)© 2020, manymanuals.com. All rights reserved. | 0.213 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals