Great-plains 1005 Assembly Instructions User Manual download pdf

Great Plains Mfg., Inc.

Installation Instructions 1

Grease Bank Kit

7- and 10-Foot EWNT Drills

Used with:

• 705 (all models)

• 1005 (all models)

General Information

These instructions explain how to install a Grease Bank

Kit. These kits greatly improve the ease of lubricating

coulter pivots by adding one or two bulkheads, with zerks

and tubing to new grease adaptors at the coulters.

These instructions apply to an installation of either:

Each kit upgrades an entire drill. There will be a few parts

left over if your drill has less than the maximum possible

number of coulters.

Due to shipping regulations, the kit does not include any

touch-up paint to restore the welded areas. Your Great

Plains dealer can provide it as Great Plains part:

821-001C PAINT GP GREEN SPRAY CAN

The grease bank does not serve the coulter disk bearing

zerks (if present), as they rotate and cannot accept a ﬁxed

lubrication tube.

Tools Required

• wire or stick welder and welding tarps,

• basic hand tools, including:

- heavy clamp or self-clamping pliers,

- a pipe or tubing cutter,

- wire brush, sand paper,

• grease and grease gun,

• green touch-up paint, and;

• suitable tractor for positioning drill.

Notations and Conventions

“Left” and “Right” are facing in the

direction of machine travel. An orienta-

tion rose in the line art illustrations

shows the directions of Left, Right,

Front, Back, Up, Down.

Call-Outs

Kit Kit Description

151-126A 7’ GREASE BANK KIT

151-127A 10’ GREASE BANK KIT

When you see this symbol, the subsequent instructions

and warnings are serious - follow without exception.

Your life and the lives of others depend on it!

Figure 1

Completed Grease Bank

27150

Single-digit callouts identify components in

the currently referenced Figure or Figures.

These numbers may be reused for different

items from page to page.

Two-digit callouts in this range reference new

parts from the new parts lists beginning on

page 8.

This two-digit callout references an affected

existing part from the table on page 8. The

description matches that in your Parts Man-

ual.

11 22

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - General Information

Page 2 - Pre-Assembly Preparation

Great Plains Mfg., Inc.2 Grease Bank Kit151-128M 02/20/2008Before You StartReview these instructions, with the following objectives ateach step:• Safe

Page 3 - Select Bulkhead Locations

Great Plains Mfg., Inc.Installation Instructions 302/20/2008 151-128MSelect Bulkhead LocationsPre-Assemble Bulkhead(s)Refer to Figure 26. For 705, sel

Page 4 - Final Bulkhead Assembly

Great Plains Mfg., Inc.4 Grease Bank Kit151-128M 02/20/2008Weld BulkheadsTack Weld Mount PlatesRefer to Figure 4If you prefer to fully protect the mou

Page 5 - Install New Adaptors

Great Plains Mfg., Inc.Installation Instructions 502/20/2008 151-128MInstall Zerks on BulkheadRefer to Figure 6Note: The ﬁtting connector has three p

Page 6 - Install Tubing

Great Plains Mfg., Inc.6 Grease Bank Kit151-128M 02/20/2008Install Tubing28. Select the:The tubing from the grease bank to the coulters is sup-plied a

Page 7 - Maintenance

Great Plains Mfg., Inc.Installation Instructions 702/20/2008 151-128MSecure Tubing39. When all the coulters have had tubing routed andattached, begin

Page 8 - Parts Lists

Great Plains Mfg., Inc.8 Grease Bank Kit151-128M 02/20/2008Great Plains Manufacturing, Inc.Corporate Ofﬁce P.O. Box 5060Salina, Kansas 67402-5060 USAP

Comments to this Manuals

No comments

Great-plains 1005 Assembly Instructions User Manual

Browse online or download User Manual for Gardening equipment Great-plains 1005 Assembly Instructions. Great Plains 1005 Assembly Instructions User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains 1005 Assembly Instructions