Great-plains 1005NT Operator Manual User Manual download pdf (Page 13)

Section 2 Operating Instructions

4/12/05

705 and 1005 End-Wheel No-Till Drill 150-213M

Great Plains Mfg., Inc.

Parking

Perform the following steps when parking the drill. Refer to

Storage,“Maintenance and Lubrication,” page 29, to

prepare for long-term storage.

1. Park drill on a level, solid area.

2. Lower drill until openers are resting on ground.

3. Securely block tires to prevent rolling.

4. Remove tongue jack from storage stob. Pin jack on

side of tongue. If ground is soft, place a board or plate

under jack.

5. Extend jack until tongue weight is off tractor drawbar.

6. Unplug hydraulic hoses from tractor. Do not allow

hose ends to rest on ground.

7. Remove hitch bolt and safety chain from tractor draw-

bar.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 38 39

No comments

Great-plains 1005NT Operator Manual User Manual Page 13