Great-plains 1625AHL Operator Manual User Manual download pdf (Page 23)

Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 19

2014-04-21 Table of Contents Index 411-020M

Hitching Tractor to Planter

Crushing Hazard:

Do not stand or place any part of your body between planter

and moving tractor. You may be severely injured or killed by

being crushed between the tractor and planter. Stop tractor

engine and set park brake before attaching cables and hoses.

Hydraulic Hookup

High Pressure Fluid Hazard:

Relieve pressure before disconnecting hydraulic lines.

Escaping ﬂuid under pressure can have sufﬁcient pressure to

penetrate the skin causing serious injury. Use a piece of paper

or cardboard, NOT BODY PARTS, to check for leaks. Wear

protective gloves and safety glasses or goggles when working

with hydraulic systems. If an accident occurs, seek immediate

medical attention from a physician familiar with this type of

injury.

3-Point Hitch

Refer to Figure 3

7. Connect your tractor 3-point to the planter 3-point

hitch. If using quick hitch be sure planter locks into

hitch securely.

8. Set tractor brakes and/or put tractor in Park.

9. Raise tractor 3-point just enough to relieve pressure

off of the parking stand.

10. Store 3-point stands . There are two methods:

a. Remove lower pins . Swing stand under hitch.

Reinsert pin beneath stand at inner hole.

b. Remove both pins. Invert stand. Re-pin.

Load Sway Hazard:

Adjust 3-point hitch arms and sway blocks to minimize any

side-to-side sway to assure proper tracking in the ﬁeld, and

safe road travel.

Figure 3

3-Point Hitch Stands Stored

29732

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 175 176

No comments

Great-plains 1625AHL Operator Manual User Manual Page 23