Great-plains 3000TM Operator Manual User Manual download pdf (Page 26)

22 1800-3000TM Table of Contents Index Great Plains Manufacturing, Inc.

586-536M Table of Contents Index 10/29/2013

Weight Package Assembly (Optional)

Refer to Figure 23

Caution:Lower machine until coulters are on ground and

pressure is off leveling system. Do not add weights to

1800TM.

Note: Use up to 2 sets of weights (4 weights) in positions

shown.

40. Start by removing the 3/4 x 2 Gr. 8 bolts from level

bar assembly.

41. Pivot level bar up so there will be clearance to set the

750 pound weight assemblies into place.

42. Pivot level bar spring assembly forward.

43. Carefully lower the 750 pound weight assemblies

onto center frame trusses , two on front side of fold

cylinders and two on rear side of fold cylinders.

44. Slide rear weights as far forward as possible and install

weight box stops on inside of trusses as close to

weight as possible (rear weights), secure with 1/2 x 4 1/

32 x 5 1/4 u-bolt , 1/2 lock washers and 1/2 nuts.

45. Torque u-bolts to 85 ft-lbs.

Refer to Figure 24

46. Pivot level bar and the level bar spring assembly

until holes in plates are aligned.

47. Re-install 3/4 x 2 Gr. 8 bolts , secure with 3/4 lock

washers and 3/4 nuts.

48. Torque 3/4 x 2 Gr. 8 bolts to 375 ft lbs to be sure

bolts do not work loose and cause damage to

machine.

Figure 23

Weight Package

42407

Figure 24

Level Bar

42408

1 3

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

No comments

Great-plains 3000TM Operator Manual User Manual Page 26