Great-plains 4000TT Operator Manual User Manual download pdf (Page 17)

Great Plains Mfg., Inc. Table of Contents ► Section 1: Assembly

12/15/2004 Series I 1000TT- 4000TT Turbo-Till 586-043M

Center Wing Stop, Fold Brackets & Lift Assembly

On folding models, attach the center

wing stop (1) Figure 2, to the center frame

with 5/8 x 3 x 6½ u-bolts (2), using hex nuts

and lock washers (See Machine Layout for

proper placement). Bolt the front wing fold

bracket (3), and rear fold bracket (4), if

applicable, to the center frame using 5/8 x 2

GR 8 hex bolts (5), hex nuts and lock

washers. On 1700TTX* also assemble Inside

Hinges (6) to front bar using 5/8 x 4 x 6½ u-

bolts (7) and ¾ x 3½ hex bolts (8) with lock

washers and hex nuts.

Bolt the cylinder mount bars (9) and

lift mechanism link (10) to the center frame

using 1 x 3 hex bolts (11) and secure with 1”

lock nuts. Install transport locks (12) to the

lift mechanism links (10) with a 5/16 x 3

quick pin. Install the ¾ x 5¼ usable pin &

retainer (13) in the holders for the wing fold

locks.

If you have the optional center weight

package, insert the weight pairs (14) onto the

center frame. Secure them with weight box

stops (15) and ½ x 6 x 5¼ u-bolts (16), hex

nuts and lock washers.

Figure 2

1/25/2008

* Model 1700TTX is 5 meter foreign export model, not sold in USA.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

No comments

Great-plains 4000TT Operator Manual User Manual Page 17