Great-plains 4000TT Operator Manual User Manual download pdf (Page 5)

Great Plains Mfg., Inc. Table of Contents ► Important Safety Information

12/15/2004 Series I 1000TT- 4000TT Turbo-Till 586-043M

Transport Machinery Safely

Maximum transport speed for implement is 20

mph. Some rough terrains require a slower

speed. Sudden braking can cause a towed load

to swerve and upset.

• Do not exceed 20 mph. Never travel at a

speed which does not allow adequate

control of steering and stopping. Reduce

speed if towed load is not equipped with

brakes.

• Comply with state and local laws.

• Do not tow an implement that, when fully

loaded, weighs more than 1.5 times the

weight of towing vehicle.

• Carry reflectors or flags to mark tractor and

implement in case of breakdown on the

road.

• Keep clear of overhead power lines and

other obstructions when transporting. Refer

to transport dimensions under

“Specifications and Capacities,” page 72.

• Do not fold or unfold the wings while the

tractor is moving.

Avoid High Pressure Fluids

Escaping fluid under pressure can penetrate the

skin, causing serious injury.

• Avoid the hazard by relieving pressure

before disconnecting hydraulic lines.

• Use a piece of paper or cardboard, NOT

BODY PARTS, to check for suspected

leaks.

• Wear protective gloves and safety glasses

or goggles when working with hydraulic

systems.

• If an accident occurs, see a doctor immedi-

ately. Any fluid injected into the skin must be

surgically removed within a few hours or

gangrene may result.

1 2 3 4 5 6 7 8 9 10 ... 75 76

No comments

Great-plains 4000TT Operator Manual User Manual Page 5