Great-plains 4000TT Operator Manual User Manual download pdf (Page 23)

Great Plains Mfg., Inc. Table of Contents ► Section 1: Assembly

12/15/2004 Series I 1000TT- 4000TT Turbo-Till 586-043M

40’ Outside Wing Assembly

Bolt the outside wing fold bracket (1),

Figure 8, to the outside wing (2) using 3/4 x 2

hex bolts (3) using hex nuts and lock washers.

Attach the outside wing assembly to the

inside wing using two 1 x 6 special hex bolts

(4) using nylon lock nuts. Draw the nuts

down tight but do not torque. Bolt the front

and rear gang hanger bars (5) to the outside

wing with ¾ x 2½ hex bolts (6) using hex

nuts and lock washers. Pin the rocker links (7)

to the outside wing fold brackets (1) using 1 x

3 3/8 usable clevis pins (8), machine washers

& 3/16 x 2 cotter. Finally, bolt the rocker link

(7) to the inside wing assembly with a 1 x 7

Gr. 8 hex bolt (9), use four flat washers as

shown and secure with a 1” nylon lock nut, do

not torque.

Figure 8

3/21/2005

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 75 76

No comments

Great-plains 4000TT Operator Manual User Manual Page 23