Great-plains 606NT Operator Manual User Manual download pdf (Page 23)

2014-02-10 Table of Contents Index 151-061M

Great Plains Manufacturing, Inc. Table of Contents Index 19

Operation Instructions

This section covers general operating procedures.

Experience, machine familiarity and the following

information will lead to efﬁcient operation and good

working habits. Always operate farm machinery with

safety in mind.

Pre-Start Checklist

High Pressure Fluid Hazard:

Escaping ﬂuid under pressure can have sufﬁcient pressure to

penetrate the skin. Check all hydraulic lines and ﬁttings before

applying pressure. Fluid escaping from a very small hole can

be almost invisible. Use paper or cardboard, not body parts,

and wear heavy gloves to check for suspected leaks. If an

accident occurs, seek immediate medical assistance from a

physician familiar with this type of injury.

1. Carefully read “Important Safety Information”

starting on page 1.

2. Lubricate drill per “Lubrication and Scheduled

Maintenance” starting on page 48.

3. Check all tires for proper inﬂation. See “Tire

Pressures” on page 60.

4. Check all bolts, pins and fasteners. See “Torque

Values Chart” on page 61.

5. Check drill for worn or damaged parts. Repair or

replace faulty parts before going to the ﬁeld.

6. Check hydraulic hoses, ﬁttings and cylinders for

leaks. Repair or replace faulty parts before going to

the ﬁeld.

7. Rotate both drive wheel to verify that the drive and

meters are working properly and free from foreign

material.

Falling Hazard:

Watch your step when walking on drill steps and walkboard.

Falling from drill could cause severe injury or death.

WARNING

To avoid serious injury or death:

Watch your step when climbing ladder or

walking on walkboard.

838-102C

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

No comments

Great-plains 606NT Operator Manual User Manual Page 23