Great-plains DVN8324 Assembly Manual User Manual download pdf (Page 11)

11/25/2013 550-466Q-ENG

Great Plains Manufacturing, Inc. 7

Assembly

Refer to Figure 5

Install Center Brace Bar & Torque Tube

1. Once the center Frame has been uncrated and put

on stands, the torque tube maybe installed.

2. Carefully raise the torque tube with an overhead

hoist and secure with 1 1/4 x 6 pins , 3/8 x 2 1/4 Gr.

8 hex bolts and 3/8 top lock nut.

3. Install pre-assembled hub assembly or brake hub

assembly (if machine is equipped with brakes) ,

using the 1 x 4 5/8 pin and secure with 3/8 x 2 roll

pin.

4. Attach the tire/wheel assembly to hub assembly 3)

and secure with 5/8 lug nuts .

5. Now install 3.50 x 8 x 1.25 cylinders using 1 x 3 1/

8 pins , 1.5 x 1.0 x.075 machine washers and 3/16

x 2 cotter pins.

• Install cylinder transport locks to cylinders using

the 3/8 x 3 pins and clip pin.

6. Carefully move center brace bar into position with

fork truck or overhead hoist. Secure with 3/4 x 2 hex

bolts , 3/4 lock washers and 3/4 hex nuts.

7. All bolts may be tightened to specs, See “Torque

Values Chart” on page 37. Attach plastic end caps

to all open ends of 4 x 3 tube.

9 7

Figure 5

Center Brace Bar & Torque Tube

41544

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 73 74

No comments

Great-plains DVN8324 Assembly Manual User Manual Page 11