Great-plains DVN8324 Operator Manual User Manual download pdf (Page 44)

40 8315-8324DVN Great Plains Manufacturing, Inc.

550-466M 11/25/2013

Rear Attachment Settings

Spike Drag Settings

Refer to Figure 32

a. On the spike drag, start with 5 links hanging from the

chain in drag arm bottom slot. (This is the starting point

for worst conditions). The cleaner the ground, the shorter

the pull chain may be pulled up. On the spike drag, one

of the links in the ﬁrst row of angles is turned over. This

allows the trash to start ﬂowing through the drag easier

by changing the angle of the ﬁrst row of teeth. Always

make sure that the drag is never pulling off of the hang

chains. If so, shorten pull chains.

HD Spike & Reel Settings

Refer to Figure 33

8. On the hd spike drag, start with 5 links hanging from the

chain in drag arm bottom slot. (This is the starting

point for worst conditions). The cleaner the ground, the

shorter the pull chain may be pulled up. Always make

sure that the drag is never pulling off of the hang chains

. If so, shorten pull chains.

9. Adjust nut to where spring is just making contact

with front plate .

10. Turn nut another 1” further on spring rod to set pre-

load on spring .

11. Lengthen turnbuckle to adjust front mini shank to

run more aggressive and shorten to run more passive.

Figure 32

Spike Drag Settings

41235

Figure 33

HD Spike & Reel Settings

42221

3 4

3 6

7 8

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 77 78

No comments

Great-plains DVN8324 Operator Manual User Manual Page 44