Great-plains DVN8324 Operator Manual User Manual Page 9
- Page / 78
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
11/25/2013 550-466M
Great Plains Manufacturing, Inc. 5
Important Safety Information
Look for Safety Symbol
The SAFETY ALERT SYMBOL
1
indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that fol-
lows it. In addition to design and configuration of equip-
ment, hazard control and accident prevention are
dependent upon the awareness, concern, prudence and
proper training of personnel involved in the operation,
transport, maintenance and storage of equipment.
Be Aware of Signal Words
Signal words designate a degree or level of hazard seri-
ousness.
DANGER, and the colour Safety Red, indicate an
imminent hazard which, if not avoided, will result in death
or serious injury. This signal word is limited to the most
extreme situations, typically for machine components
that, for functional purposes, cannot be guarded.
WARNING, and the colour Safety Orange, indicate a
potential hazard which, if not avoided, could result in
death or serious injury, and includes hazards that are
exposed when guards are removed. It may also be used
to alert against unsafe practices.
CAUTION, and the colour Safety Yellow, indicate a
potential hazard which, if not avoided, may result in
minor or moderate injury. It may also be used to alert
against unsafe practices.
Prepare for Emergencies
▲ Be prepared if a fire starts
▲ Keep a first aid kit and fire extinguisher handy.
▲ Keep emergency numbers for doctor, ambulance, hospital
and fire department near phone.
Be Familiar with Safety Decals
▲ Read and understand “Safety Decals and Lights”on
page 10, thoroughly.
▲ Read all instructions noted on the decals.
▲ Keep decals clean. Replace damaged, faded and illegible
decals.
1. Symbols and colours in this manual, and on north american models, are based on ANSI standard Z535.
Decals on international models are based on ISO standard 3864.
- Operator Manual 1
- Table of Contents Index 2
- Table of Contents 3
- Equipment Identification 5
- Machine Record 6
- Introduction 7
- Description of Unit 7
- Using This Manual 8
- Owner Assistance 8
- Important Safety Information 9
- Wear Protective Equipment 10
- Use Safety Chains 10
- Avoid High Pressure Fluids 10
- Keep Riders Off Machinery 10
- Tire Safety 11
- Use Safety Lights and Devices 11
- Transport Machinery Safely 11
- Shutdown and Storage 11
- Practice Safe Maintenance 12
- Safety At All Times 13
- Accident Prevention 13
- Safety Decals and Lights 14
- Reflectors: Fluorescent Panels 15
- Reflectors: Red 15
- Reflectors: Orange 15
- EXCESSIVE SPEED HAZARD 16
- Danger: Crush 17
- Danger: Electrocution 17
- Warning: Wing Crushing 18
- Warning: High Pressure Fluid 18
- Warning: Hand Pinch 18
- 848-530C REV A 18
- Caution: Read Operator Manual 19
- Caution: Tires Not A Step 19
- Notice: Transport Lock 19
- Danger: Cutting of Foot 19
- Preparation and Setup 20
- 11/25/2013 550-466M 21
- Clevis Hitch 22
- Category III Hitch 22
- Electrical Hookup 23
- Brake Hook-up (Option) 24
- Air Brake Hook-up 25
- Hydraulic Brake Hook-up 26
- Operating Instructions 27
- Unfolding and Folding 28
- Unfolding 30
- 550-466M 11/25/2013 32
- Lowering 33
- Transporting the Discovator 35
- Brake Operation (option) 37
- Transport 39
- Field Operation 40
- First Time Field Adjustments 41
- Side to Side Leveling 42
- Disc Gang Depth Calibration 42
- Scraper Settings 43
- Rear Attachment Settings 44
- Coil Tine Settings 45
- Reel Settings 45
- Unfolded Storage 46
- Maintenance and Lubrication 47
- Maintenance Lift Lock 48
- Wheel Bearing Hub 49
- All Hinge Points 49
- Brake Maintenance (Option) 50
- Air Brake Maintenance 52
- Brake Shoe Replacement 54
- Brake Drum Maintenance 58
- Mounting Wheels 59
- Test and Adjust Brakes 59
- Troubleshooting 60
- Coulter/Disc Gang Performance 61
- General Performance 61
- Sweep/Shank Performance 62
- Brakes (Option) 63
- Problem Causes Solutions 64
- Retract Kit (Option) 65
- Appendix 66
- Torque Values Chart 67
- Tire Inflation Chart 68
- Appendix 65 69
- Appendix 67 71
- Warranty 73
- Salina, Kansas 67402-5060 USA 78
Related products and manuals for Gardening equipment Great-plains DVN8324 Operator Manual
(59 pages)
(36 pages)© 2020, manymanuals.com. All rights reserved. | 2.435 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals