Great-plains 4000TM Assembly Manual User Manual download pdf (Page 20)

16 1800-3000TM Table of Contents Index Great Plains Manufacturing, Inc.

586-536E Table of Contents Index 04/12/2013

Depth Stop & Angle Gauge

Refer to Figure 15

Note: See machine layout drawings in Appendix for

proper gang gauge placement for each model.

60. Slide depth stop tube from rear of machine under

left wing stop through square hole on depth control

bracket on center wing brace. Align rear holes over

lever on torque tube, secure with 1/2 x 3 hex bolt ,

1/2 top lock nut.

61. Fasten depth stop assembly on top of depth stop

tube with 1/2 x 2 1/2 hex bolts , 1/2 lock washers

and nuts.

62. Attach angle gauge bracket assembly to front of

center frame with 1/2 x 3 1/32 x 6 u-bolts , 1/2 lock

washers and 1/2 nuts.

63. Attach gauge link to ear on front of center frame

and gauge bracket assembly , secure with 3/8 x 1

1/4 hex bolts and 3/8 top lock nuts.

64. Tighten all bolts with lock nuts snug, but do not

torque. The rest of the bolts may be tightened to

specs, See “Torque Values Chart” on page 38.

Figure 15

Depth Stop & Angle Gauge

42971

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

No comments

Great-plains 4000TM Assembly Manual User Manual Page 20