Great-plains 4000TM Assembly Manual User Manual download pdf (Page 34)

30 1800-3000TM Table of Contents Index Great Plains Manufacturing, Inc.

586-536E Table of Contents Index 04/12/2013

3000 Wing Fold Assist

Refer to Figure 25

Note: Wings need to be folded up when installing the

proximity sensor to prevent damage to sensor

and brackets. Be sure wing safety lock pins are

installed.

112.Slide proximity mount bracket over hinge pin in

orientation shown, secure with 1 lock nut . Tighten

1 lock nut snug but do not torque.

113.Slide proximity sensor through inside, big hole of

proximity mount bracket from rear. Be sure there is

a nut on back side of bracket and secure with a nut

on front side. Route leads of proximity sensor

towards center of machine on front tube of center

frame as shown.

114.Plug short leads of the fold assist harness , one

end to the light harness lead w/valve and the other

end into the lead from the bypass down pressure

valve solenoid .

115.Route the rest of fold assist harness as shown

back to front tube of center frame and attach plugs to

the proximity sensor leads.

116. Be sure and get all wiring harnesses fastened up

securely with hose wraps or clamps (if routed close

to hydraulic hoses) or use cable ties .

1 2

5 4

Figure 25

3000 Wing Fold Assist

43130

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 63 64

No comments

Great-plains 4000TM Assembly Manual User Manual Page 34