Great-plains NTA3510 Installation Instructions User Manual download pdf (Page 26)

Great Plains Mfg., Inc.

26 Blockage Monitor Kits

168-414M 10/29/2008

NTA35: Install WSMB Harnesses

Start with Tower 1 (left wing, left tower)

Refer to Figure 59

22. Select one:

467981201 INT AG HARNESS, WSMB MODULE

Join the row harness connector to the mating

connector on the row harness .

Plug the WSMB connectors into the WSMB .

These connectors are not interchangeable, and are

keyed to ensure correct insertion.

Refer to Figure 57 on page 25

23. Select two:

800-082C CABLE TIE .31X21.5 6DIA 120LB

Coil up excess row harness leads and tie the bundle

to the tower, above and below the lower U-bolt.

24. Repeat step 22 and step 23 for each tower.

NTA35: Interconnect Center WSMBs

The center section Towers 2, 3 and 4 are close enough

that their WSMB harnesses are directly interconnected.

Refer to Figure 60

25. At the center section WSMB harnesses for

Tower 2 and Tower 3, interconnect

the female (receptacle) of left (outer) CAN bus

with

the male (plug) end of the mid-wing CAN bus.

Also connect the

power receptacle and plug

Note: The unconnected Tower 3 CAN bus connector (at

drill center) must be a receptacle.

26. Interconnect the WSMB harnesses for Tower 3

and Tower 4.

Refer to Figure 61, and Figure 62 and 63 on page 27

27. Select one new:

467980140 DJ 20’ HARNESS EXT

28. At the front center of the drill, locate the existing

implement WSMB:

467982000S1 PLNTR CNTRL OUTPUT MODULE(POM)

At the WSMB connectors, follow harness:

467983502 DJ 2SOL YP24LIFT/HITCH FCM HRN

Locate the CAN bus terminator:

467980126 MINI CAN TERMINATOR

Figure 59: NTA35:

WSMB Harness

28200

239

Figure 60: NTA35:

Center Towers Interconnect

28201

Figure 61: NTA35:

Existing WSMB Location

28438

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

Comments to this Manuals

No comments

Great-plains NTA3510 Installation Instructions User Manual Page 26

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains NTA3510 Installation Instructions