Great-plains NTA3510 Installation Instructions User Manual download pdf (Page 4)

Great Plains Mfg., Inc.

4 Blockage Monitor Kits

168-414M 10/29/2008

3N-4010HDA Installation

This installation requires one of the following kits:

168-411A 3N4010HDA-6675 (66 row, 7.5in)

168-412A 3N4010HDA-4810 (48 row, 10in)

If installation is being done on a new 3N-4010HDA, use

the instructions in the 196-444Q Pre-Delivery manual.

The instructions in this manual (168-414M) presume a

drill originally delivered and setup without blockage.

Additional installation information is found in the

DICKEY-john IntelliAg Air Cart Control Operator’s man-

ual.

Note: The DICKEY-john manual has only general har-

ness routing for the Great Plains air drills, and

some cable part numbers are slightly different from

those in the kits.

Refer to Figure 4 and Figure 5

9. Select six (6):

168-465D DIST TOWER MODULE MOUNT PLATE

At each tower, remove the nuts and lock washers

at the lower U-Bolt , and mount the plate .

Plate orientation is small holes to top, and:

on Towers 1 & 6: extension to drill center

on Towers 2 & 5: extension away from drill center

on Towers 3 & 4: extension to drill rear

3N: Install WSMBs

Start with the left tower (Tower 1).

Refer to Figure 4 and Figure 5

10. Select one:

467981100S1 INTAG WSMB/FLW MNTR MODULE 18R

and two sets:

802-224C HHCS 1/4-20X1 1/4 GR5

804-006C WASHER LOCK SPRING 1/4 PLT

803-006C NUT HEX 1/4-20 PLT

Mount the WSMB on the front of the plate ,

with the connector ports down.

11. Repeat step 10 for the remaining towers.

The WSMB orientation is:

on Wing towers (Figure 4):

connectors down, module to front

on Center towers (Figure 5):

connectors down, module to center

Figure 4: 3N:

Tower 2 Module Mount

27058

2 312

Figure 5: 3N

Tower 3 Module Mount

28182

39 12

1 2 3 4 5 6 7 8 9 ... 41 42

Comments to this Manuals

No comments

Great-plains NTA3510 Installation Instructions User Manual Page 4

Comments to this Manuals

Related products and manuals for Gardening equipment Great-plains NTA3510 Installation Instructions