17
Simba SL700
603-216M-ENG
2013-01-25
2.5 Folding and Unfolding
2.5.1 Unfolding into the Work
Position
1 Raise the machine until the pointer
is aligned with the mark on the lift
cylinder.
2 Fullyextendthetinebeamtorelease
thetransportlock.
3 Unfold the machine until the pointer
reaches the red line on the wing
cylinderandstop.(Usingthepointers
/markersensuresthatthemachineis
foldingunder4m).
Ensurethe wingsunfold together
(ie. symmetrically). If they don‘t,
foldthemandstartagain.
4 Fullyretractthetinebeam.
5 Raise the machine enough for the
wings to clear the ground when
unfolding.
6 Resumeunfoldingthewingsuntilfully
unfolded.
7 Movethecoveringdiscintothework
position.
2.5.2 Folding into the
Transport Position
Payattentiontoyoursurroundings.
Beware of any overhead power
linesetc.whenfolding.
1 Drawuptherearrollandisolatethe
circuitusingthetaps.
2 Retract the tine beam. Move the
coveringdisctothetransportposition.
3 Raise the machine enough for the
wingstoclearthegroundwhenfolding.
4 Foldthemachineuntilthemarkeron
thewingcylinderreachestheredline.
Ensurethewingsfoldtogether(ie.
symmetrically).Iftheydon‘t,unfold
themandstartagain.
5 Lowerthemachineuntilthemarkeron
theliftcylinderreachestheredline.
6 Finish folding the machine until the
winglockengages.
7 Lowerthe machinethe remainder of
thewayontothetransportshims.
8 The machine is now ready for road
transport.
Roadtransportspeedshouldnot
exceed16mph(25kmh).
Fig. 2.02: Lift Cylinder Pointer and Marker
Fig. 2.03: Wing Cylinder Pointer and Marker
Fig. 2.04: Folding the SL700
2.Transportation/Installation
Comments to this Manuals