Great-plains Simba SL700 Operator Manual User Manual download pdf (Page 18)

18

Simba SL700

603-216M-ENG

 2013-01-25

2.8 Parking the machine

In order to avoid damage as a result of

moisture,themachineshouldbeparked,if

possible,indoorsorundercover.

Whenmanoeuvringthemachine,

pay attention to your surroun-

dings. Ensure that nobody is in

themanoeuvringarea.

•Fitwheelchocks.

•Lowertheparkingstand.

•Raisethemachineandremoveshimsfrom

theliftaxleanddrawbarcylinders.

•Lowerthemachinetotheground,ensuring

thatitisstable.

When parking with the machine

unfolded,ensurethat noloadis

carriedbytheSpringresettines.

Thiscanleadtobreakageofthe

points.

•Removethedrawbarpinanddriveforward

slowlyuntilhitchisclearoftractordrawbar.

•Lowerthedrawbartotheground.

•Switchoffthetractoranddisconnecthy-

drauliclines.

2.6 Trailing Implements

2.6.1 Hitching a Press Roll to

the SL700

Maximum rear drawbar vertical

loading-650kg

Adding a trailing implement to

theSLwillaffectthestabilityand

handling of the machine both in

transportandwork.

1. RaiseMachinetoremoveshimsfrom

theliftaxletoallowreardrawbartobe

raised/lowered.

2. Reverse the SL700 up to the press

roll, ensuring that the drawbars are

correctly aligned allowing a slight

clearancetoenablethemachinesto

becoupledtogether.

3. LowertheSL700totheground.

4. Attach the hydraulic hoses between

theSL700andthepressroll.

5. Open the taps on the press roll

drawbar.

6. Raise the press roll drawbar to

approximately 300mm above the

SL700drawbarclevis.

7. Closethepressrolldrawbartaps.

8. Raise/lower the SL700 to the same

heightasthepressrolldrawbar,then

reversetheSL700tocouplethetwo

machinestogether.

9. Open the taps on the press roll

drawbar.

10. Fullyraisebothmachinesintotheroad

transportposition.

11. Close the taps on the press roll

drawbar.

2.7 When driving on the

road

Whendrivingontheroadthemachinemust

beconvertedtothetransportationposition.

Whendrivingontheroad,ensure

adequateclearancetopreventthe

workingelementsdraggingonthe

ground.

Ensure that no fouling occurs

between the SL and the towed

machine.

Any tines on the towed machine

shouldbeadjustedsothattheydo

notengagethesoil(orshouldbe

removedaltogether).Ininstances

whereaUniPressistowedbehind

the SL the UniPress tine frame

shouldberemovedcompletely.

2.Transportation/Installation

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Comments to this Manuals

No comments