Great-plains NP4000B Operator Manual User Manual Page 80

  • Download
  • Add to my manuals
  • Print
  • Page
    / 200
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 79
76 2013+ NP4000/A/B Table of Contents Index Great Plains Manufacturing, Inc.
417-199M Table of Contents Index 2014-05-14
Liq: Hitching Conventional Nurse Tank
Hitch a nurse tank to the applicator only at the field, and
not prior to transport.
Liq: Mechanical Cart Hitching
1. Spot the applicator to avoid reverse moves after cart
hitching.
Refer to Figure 53
2. Bring the applicator rear hitch tongue and nurse tank
cart tongue into close proximity (a few inches).
3. Push down on the red tongue release handle .
This frees the applicator rear hitch tongue to
extend 7 inches (17.8 cm) to the rear, and 9 inches
(23 cm) to either side, to assist with cart tongue
alignment.
4. Align the cart clevis hitch with the applicator pull
bar. Insert and secure the 1 inch (2.6 cm) hitch pin.
5. Securely attach the cart’s safety chain(s) to the
hitch chain anchor(s) .
6. Optionally re-seat the applicator rear hitch tongue, at
this time, by using the tractor to move the applicator
backward several inches, until the latch on the hitch
re-engages.
Liq: Making Nurse Tank Connections
1. Close shut off valves on all hoses of both tank
and applicator .
2. Route tank supply hose to applicator inlet .
Allow ample slack for tight field turns and uneven
ground. Do not leave so much slack that the hose
can reach the ground.
3. Remove plug from applicator inlet, and any cap on
tank supply hose.
4. Inspect and clean connector fittings.
5. Mate connectors of tank and applicator supply
hoses. Fold cam levers forward to lock. Leave valves
closed.
6. If the tank has additional hoses, secure them at the
tank.
L17
L45
L16
L50
L51
L48
L46
L44
L47
Equipment Damage Risk:
Use only pre-mixed liquid fertilizer.
Figure 53
Applicator-Cart Hitch
32349
L44
L46
L47
L48
L45
L50
L17
L51 L16
Page view 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 199 200

Comments to this Manuals

No comments