Great-plains ADC2350BE Operator Manual User Manual Page 29
- Page / 108
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 25
2012-08-01 Table of Contents Index 167-085M
ADC2350/E Older Style Hoses with Color Ties
Only trained personnel should work on system hydraulics!
Great Plains hydraulic hoses are color coded to help you
hookup hoses to your tractor or drill outlets. Hose
connections are also passed through to a rear panel
when the air cart leads the drill. Hoses that go to the
same remote valve are marked with the same color tie.
Refer to Figure 17
To distinguish hoses on the same hydraulic circuit, refer
to plastic hose label. The hose under an
extended-cylinder symbol feeds a cylinder base end. The
hose under a retracted-cylinder symbol feeds a cylinder
rod end.
Make sure all tractor levers are in neutral or float, or
tractor hydraulics are off, before making connections.
Fan Priority
If your tractor has a priority circuit for hydraulic motors,
connect the fan (Yellow) to this circuit.
Sump First and Last
Seals in the hydraulic fan motor can be damaged if the
return line is pressurized. Always connect the SUMP
hose first and disconnect it last. The sump hose has a
larger (1.06 inch) quick-connect coupling.
ADC2350/E Hydraulic Hookup
The cart fan uses only the Extend/Base side of the
Yellow circuit, but both sides (plus sump) are passed
through to the trailing drill.
Figure 17
Plastic Hose Label
817-348c
17641
The hose & large connector labeled sump refers to high
volume hydraulic motor return and should always be
connected to the port on the tractor capable of handling high
volume low pressure return oil. DO NOT connect this line to
low volume case drain lines or low volume sump lines on the
tractor. See tractor manufacturer’s recommendations for high
volume hydraulic motor return.
Color ADC2350/E Hydraulic Function
<none>
(decal)
SUMP return:
Cart: Hydraulic Fan
Drills: Down pressure or weight transfer
Yellow Cart: Hydraulic Fan (Extend side only)
Drill (NTA only): Fold Cylinders
Blue Cart: <no function>
Drills: Lift Cylinders
Orange Cart: Auger
Drills: Marker Cylinders
<none> Cart: Case Drain
Drills: <no function>
- Operator Manual 1
- Table of Contents 3
- Important Safety Information 5
- Avoid High Pressure Fluids 6
- Use A Safety Chain 6
- Keep Riders Off Machinery 6
- Use Safety Lights and Devices 6
- Check for Overhead Lines 7
- Transport Machinery Safely 7
- Wear Protective Equipment 7
- Handle Chemicals Properly 8
- Confined Space 8
- Shutdown and Storage 8
- Practice Safe Maintenance 9
- Tire Safety 9
- Safety At All Times 9
- Safety Decals 10
- 838-266C 11
- Red Reflectors 11
- 838-265C 11
- Amber Reflectors 11
- 838-267C 12
- Daytime Reflectors 12
- 818-557C 12
- Danger: Cannot Read English 12
- EXCESSIVE SPEED HAZARD 14
- 818-339C 15
- 818-622C 15
- Introduction 19
- Using This Manual 20
- Owner Assistance 21
- Preparation and Setup 22
- Cart Drive System 23
- Hitching 24
- Color Hydraulic Function 28
- 817-348c 29
- Set Up the Implement 32
- Row Setup Data 33
- Operating Instructions 35
- Walkboard Ladders 36
- Hopper Lids 37
- Strainer 38
- Meter Doors 39
- Meter Hand Crank 40
- Drive Chain Lockout 41
- Auger Operations 42
- Transport 45
- Monitor Material Configuration 47
- Loading Material 48
- Cart Diverter Valve 49
- Unloading the Cart 51
- Unloading Front Hopper 53
- Unloading Rear Hopper 54
- Unloading Closeout 56
- Field Operations 57
- Final Field Checklist 58
- Planting Sequence 58
- Planting 58
- Adjustments 60
- Hoppers for This Material 62
- Single Dual 62
- Meter Rate Adjustment 64
- FINAL DRIVE 65
- DRIVING DRIVEN 65
- Changing Meter Flutes 70
- Fan Speed Adjustment 72
- 3N-4010HDA Lift Switch 73
- Clutch Lock-Up 74
- Troubleshooting 75
- Excessive seed 77
- Problem Cause Solution 77
- Maintenance and Lubrication 78
- Chain Slack 79
- Problem Clean-Outs 81
- Hopper Entry 82
- As Required 85
- Seasonal 87
- Blockage Detector 88
- 10 inch Seed Monitor Console 88
- Alternate Flute Sets 89
- ADC2350/E Hitches 90
- Variable Rate Control 90
- Appendix 91
- Torque Values Chart 92
- Chain Routing 93
- Hydraulic Diagrams 94
- ADC2350/E Hydraulic Circuits 95
- Warranty 102
- Table of Contents Index 107
- Salina, Kansas 67402-5060 USA 108
Related products and manuals for Gardening equipment Great-plains ADC2350BE Operator Manual
(54 pages)
(49 pages)© 2020, manymanuals.com. All rights reserved. | 0.184 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals